Wire My ThermostatHoneywell Home T9 Smart Thermostat wiring for 4 wires, no c wire
The Honeywell Home T9 Smart Thermostat works with this setup, but you’ll need an adapter or extra wire (details below).
R, W, Y and G is the classic furnace + central AC setup found in millions of US homes, one wire short of what most smart thermostats want. The fix is usually an adapter at the furnace, not new wire.
1Snap a photo of your old thermostat’s wires (optional)
AI reads the terminal letters and wire colors, then you double-check them. Photos are not saved.
2Tick every terminal that has a wire
Pull the faceplate off your old thermostat. Use the letter printed next to each wire, not its color. Skip short jumper wires between two terminals.
More labels (W3, X, X2, K, PEK, L, S, T, U, HUM, DEHUM)
3A few quick questions
4Your wiring
Which smart thermostats work with your wires?
Honeywell Home T9 Smart Thermostat
Works with an adapter| Wire | Color | Job | Connect to | Note |
|---|---|---|---|---|
| R | red | 24 V power | R | |
| W | white | Heat, stage 1 | W | |
| Y | yellow | Cooling, stage 1 | K | Adapter carries cooling + fan on this wire |
| G | green | Fan | C | Moves to C with the adapter |
Install steps
- Turn off power to the furnace/air handler (switch or breaker) and the AC condenser. Confirm the old thermostat is dead.
- Photograph the old wiring, then label each wire with the letter it came off. Ignore short jumpers.
- Install the adapter at your furnace or air handler following its instructions, with power still off.
- Connect each wire to the Honeywell T9 terminal shown above. Cap unused wires one at a time.
- Restore power and finish setup in the app.
- Test heat, cool and fan. If a breaker trips or equipment runs nonstop, power off and call a pro.
What you need
- Honeywell Home T9 Smart ThermostatThe thermostat itselfCheck price
- Honeywell Home wire saver moduleCreates a C wire from 4 wiresCheck price
As an Amazon Associate we earn from qualifying purchases, at no cost to you.
Confirm against the official Honeywell Home install guide. The app also checks your wiring during setup.
Frequently asked questions
Where does each wire go on the Honeywell T9?
R → R; W → W; Y → K; G → C.
Do I need a C wire for the Honeywell T9?
No C wire: install a Honeywell wire saver at the furnace. It frees up a wire to become C, with the Y wire moving to K.