Wire My ThermostatHoneywell Home T9 Smart Thermostat wiring for ac only, with c wire
Good news: the Honeywell Home T9 Smart Thermostat is a direct swap for this setup. Every wire has a matching terminal.
Cooling-only systems (central AC with an air handler and no heat) are common in the South. With a C wire, most smart thermostats install directly.
1Snap a photo of your old thermostat’s wires (optional)
AI reads the terminal letters and wire colors, then you double-check them. Photos are not saved.
2Tick every terminal that has a wire
Pull the faceplate off your old thermostat. Use the letter printed next to each wire, not its color. Skip short jumper wires between two terminals.
More labels (W3, X, X2, K, PEK, L, S, T, U, HUM, DEHUM)
3A few quick questions
4Your wiring
Which smart thermostats work with your wires?
Honeywell Home T9 Smart Thermostat
Works: direct swap| Wire | Color | Job | Connect to | Note |
|---|---|---|---|---|
| R | red | 24 V power | R | |
| Y | yellow | Cooling, stage 1 | Y | |
| G | green | Fan | G | |
| C | blue | Common (C wire) | C |
Install steps
- Turn off power to the furnace/air handler (switch or breaker) and the AC condenser. Confirm the old thermostat is dead.
- Photograph the old wiring, then label each wire with the letter it came off. Ignore short jumpers.
- Connect each wire to the Honeywell T9 terminal shown above. Cap unused wires one at a time.
- Restore power and finish setup in the app.
- Test heat, cool and fan. If a breaker trips or equipment runs nonstop, power off and call a pro.
What you need
- Honeywell Home T9 Smart ThermostatThe thermostat itselfCheck price
As an Amazon Associate we earn from qualifying purchases, at no cost to you.
Confirm against the official Honeywell Home install guide. The app also checks your wiring during setup.
Frequently asked questions
Where does each wire go on the Honeywell T9?
R → R; Y → Y; G → G; C → C.
Do I need a C wire for the Honeywell T9?
You already have a C wire, so no adapter is needed.